DisplayCAL 生成 madVR 3D LUT 出错求助

如题，用DisplayCAL默认的madvr 3d lut设置，Profiling过程的最后，报错“Profiling has not finished”
校色仪是ColorMunki Design
log里的完整信息是
2019-01-03 13:34:37,313 Session log: madVR 2019-01-03 13-28 0.3127x 0.329y S XYZLUT+MTX
2019-01-03 13:34:37,315
2019-01-03 13:34:37,367 Connected to madVR version 0.92.17.0 (D:\softwares\Players\madvr\madHcNet32.dll)
2019-01-03 13:34:37,407 Output levels: 0-255
2019-01-03 13:34:37,408 Pattern area: 100%
2019-01-03 13:34:37,408 Background level: 30%
2019-01-03 13:34:37,410 Background mode: APL linear
2019-01-03 13:34:37,410 Border width: 20 pixels
2019-01-03 13:34:37,410
2019-01-03 13:34:37,410 Working directory:
2019-01-03 13:34:37,411   d:\
2019-01-03 13:34:37,411    users\
2019-01-03 13:34:37,411     ***\
2019-01-03 13:34:37,411      appdata\
2019-01-03 13:34:37,411       local\
2019-01-03 13:34:37,411        temp\
2019-01-03 13:34:37,411         DisplayCAL-m6nafb\
2019-01-03 13:34:37,413
2019-01-03 13:34:37,413 Command line:
2019-01-03 13:34:37,413   D:\Users\***\Downloads\Argyll_V2.0.1\bin\dispread.exe
2019-01-03 13:34:37,414     "-P0.5,0.5,10.000000"
2019-01-03 13:34:37,414     -v
2019-01-03 13:34:37,414     -dmadvr
2019-01-03 13:34:37,414     -c1
2019-01-03 13:34:37,415     -yl
2019-01-03 13:34:37,415     -H
2019-01-03 13:34:37,415     -K
2019-01-03 13:34:37,417     "madVR 2019-01-03 13-28 0.3127x 0.329y S XYZLUT+MTX.cal"
2019-01-03 13:34:37,417     -s
2019-01-03 13:34:37,417     "madVR 2019-01-03 13-28 0.3127x 0.329y S XYZLUT+MTX"
2019-01-03 13:34:37,417
2019-01-03 13:34:37,737 DisplayCAL: Starting interaction with subprocess
2019-01-03 13:34:37,742 Number of patches = 1519
2019-01-03 13:34:37,742 Setting up the instrument
2019-01-03 13:34:37,742 Instrument Type:   ColorMunki
2019-01-03 13:34:37,743 Serial Number:     1010941
2019-01-03 13:34:37,743 Firmware version:  288
2019-01-03 13:34:37,743 Chip ID:           01-0A86EB160000E3
2019-01-03 13:34:37,743 Version string:    'colormunki FW V1.32  Build Nr. 1303'
2019-01-03 13:34:37,744 Calibration Ver.:  6
2019-01-03 13:34:37,744 Production No.:    118053
2019-01-03 13:34:37,900 Display type ignored - instrument doesn't support display type selection
2019-01-03 13:34:38,190 Created MadVR window
2019-01-03 13:34:38,967
2019-01-03 13:34:38,969 Set instrument sensor to calibration position,
2019-01-03 13:34:38,970  and then hit any key to continue,
2019-01-03 13:34:38,973 DisplayCAL: Waiting for send buffer
2019-01-03 13:34:44,569 DisplayCAL: Sending buffer: ' '
2019-01-03 13:34:44,572  or hit Esc or Q to abort:
2019-01-03 13:34:47,632 Calibration complete
2019-01-03 13:34:47,634
2019-01-03 13:34:47,683 Place instrument on test window.
2019-01-03 13:34:47,684 DisplayCAL: Waiting for send buffer
2019-01-03 13:34:52,526 DisplayCAL: Sending buffer: ' '
2019-01-03 13:34:52,528 Hit Esc or Q to give up, any other key to continue:
2019-01-03 13:34:55,753 Measured display update delay of 0 msec, using delay of 100 msec & 0 msec inst reaction
2019-01-03 15:13:02,990 Patch 1519 of 1519
2019-01-03 15:13:03,226 The instrument can be removed from the screen.
2019-01-03 15:13:06,500 DisplayCAL: Reached EOF (OK)
2019-01-03 15:13:07,091 Successfully disconnected from madTPG
2019-01-03 15:13:07,092 ...aborted.
2019-01-03 15:13:07,197 Profiling has not been finished.
2019-01-03 15:16:12,223 Executing BaseApp.OnExit()
2019-01-03 15:16:12,223 Running application exit handlers
2019-01-03 15:16:12,224 Waiting for thread ScriptingHost.ConnectionHandler to exit
2019-01-03 15:16:12,349 ScriptingHost.ConnectionHandler exited
2019-01-03 15:16:12,351 Exiting DisplayCAL
2019-01-03 15:16:12,569 Ran application exit handlers

可以看到patch都跑完了然后就挂了，不过还是看不懂到底什么原因


只是给显示器校色的话能够正常完成，可能是patch数少？（默认auto-optimized只有175）

MadVR里选显示器已校色和专门生成一个3d lut区别很大吗？


先谢过了！

emmm，又跑了一遍没问题了。。。

我拿0.92.15+怎么都可能出错，换成0.92.14就好了